GPIO Ouput Mode with Open Drain state

By | September 21st, 2016|Blog|

This video explains the How Exactly the Open drain state of the GPIO pin works with animations. In any MCUs, while programming you may come across the situation where you might have confused whether to configure the GPIO Ouput mode as Open drain or Push-pull, the below video clarifies the open drain state of the

STM32 PLL Programming Fundamentals

By | September 21st, 2016|Blog|

This video explains Clocking MCU by Internal PLL (Running MCU at Full Speed) STM32F4xx based MCU is used in this video and it clearly explains all the PLL aspects of the Microcontroller. PLL is a clock generation engine in the MCU which is used to generate the clock speed which is much higher than the internal

GPIO: Leakage Mechanism of an I/O pin due to floating input

By | September 21st, 2016|Blog|

This video explains you how a current leakage can happen due to floating state of an I/O pin in input mode. Watch this video to understand more about this. Also please subscribe to our YT channel here for more videos http://www.youtube.com/watch?v=n3ZSz4ZgInU