{"id":2192,"date":"2019-07-02T09:55:12","date_gmt":"2019-07-02T09:55:12","guid":{"rendered":"http:\/\/fastbitlab.com\/?p=2192"},"modified":"2023-08-18T14:41:22","modified_gmt":"2023-08-18T09:11:22","slug":"gpio-output-mode-push-pull-state","status":"publish","type":"post","link":"https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/","title":{"rendered":"STM32 GPIO Lecture 6 : GPIO output mode with push pull state"},"content":{"rendered":"
\n
\n
\n
\n
\n

GPIO output mode with push pull state<\/h2>\n
\n
\n
\n

 <\/p>\n

\n

 <\/p>\n<\/div>\n<\/div>\n<\/div>\n

GPIO (General Purpose Input\/Output) pins on microcontrollers or single-board computers can be configured in various modes including input, output, and alternate function modes.<\/span><\/p>\n

When configured as an output, GPIO pins can be set to operate in either push-pull or open-drain mode. In push-pull mode, the GPIO pin can both source (provide current) and sink (draw current) current, while in open-drain mode, the pin can only sink current.<\/span><\/p>\n

 <\/p>\n

\"GPIO
Figure1. GPIO output mode with push pull state<\/figcaption><\/figure>\n

 <\/p>\n

The push-pull state is the default configuration of any GPIO pin<\/a> in output mode. When you enable GPIO port<\/a> by default, its pin will be in input mode. But if you set any pin as the output mode, then by default it will be in push-pull configuration.<\/span><\/p>\n

The name Push-pull output configuration because output will be pulled actively between low and high by using two transistors.<\/span><\/p>\n

Push-pull configuration doesn\u2019t need any pull-up\/pull-down resistor. Push-pull output uses two transistors. Each will be on to drive the output to the appropriate level.<\/span><\/p>\n

From Figure 1. The top transistor will be ON when the output has to be driven high. The bottom transistor will turn ON when the output has to go low.<\/span><\/p>\n

 <\/p>\n

The exact method for configuring a GPIO pin in push-pull output mode can vary depending on the specific microcontroller or single-board computer you are using. It’s always a good idea to consult the documentation for your particular device to ensure you’re using the correct registers and settings.<\/p>\n

In the following article, let’s learn<\/span> Optimizing I\/O power consumption<\/a><\/span>.<\/span><\/p>\n

 <\/p>\n

FastBit Embedded Brain Academy Courses,<\/b><\/span><\/p>\n

Click here:<\/span> https:\/\/fastbitlab.com\/course1<\/a><\/span><\/p>\n<\/div>\n

 <\/h3>\n
\n
<\/div>\n

 <\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

GPIO output mode with push pull state     GPIO (General Purpose Input\/Output) pins on microcontrollers or single-board computers can be configured in various modes including input, output, and alternate function modes. When configured as an output, GPIO pins can be set to operate in either push-pull or open-drain mode. In push-pull mode, the GPIO […]<\/p>\n","protected":false},"author":1,"featured_media":2194,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"ocean_post_layout":"","ocean_both_sidebars_style":"","ocean_both_sidebars_content_width":0,"ocean_both_sidebars_sidebars_width":0,"ocean_sidebar":"0","ocean_second_sidebar":"0","ocean_disable_margins":"enable","ocean_add_body_class":"","ocean_shortcode_before_top_bar":"","ocean_shortcode_after_top_bar":"","ocean_shortcode_before_header":"","ocean_shortcode_after_header":"","ocean_has_shortcode":"","ocean_shortcode_after_title":"","ocean_shortcode_before_footer_widgets":"","ocean_shortcode_after_footer_widgets":"","ocean_shortcode_before_footer_bottom":"","ocean_shortcode_after_footer_bottom":"","ocean_display_top_bar":"default","ocean_display_header":"default","ocean_header_style":"","ocean_center_header_left_menu":"0","ocean_custom_header_template":"0","ocean_custom_logo":0,"ocean_custom_retina_logo":0,"ocean_custom_logo_max_width":0,"ocean_custom_logo_tablet_max_width":0,"ocean_custom_logo_mobile_max_width":0,"ocean_custom_logo_max_height":0,"ocean_custom_logo_tablet_max_height":0,"ocean_custom_logo_mobile_max_height":0,"ocean_header_custom_menu":"0","ocean_menu_typo_font_family":"0","ocean_menu_typo_font_subset":"","ocean_menu_typo_font_size":0,"ocean_menu_typo_font_size_tablet":0,"ocean_menu_typo_font_size_mobile":0,"ocean_menu_typo_font_size_unit":"px","ocean_menu_typo_font_weight":"","ocean_menu_typo_font_weight_tablet":"","ocean_menu_typo_font_weight_mobile":"","ocean_menu_typo_transform":"","ocean_menu_typo_transform_tablet":"","ocean_menu_typo_transform_mobile":"","ocean_menu_typo_line_height":0,"ocean_menu_typo_line_height_tablet":0,"ocean_menu_typo_line_height_mobile":0,"ocean_menu_typo_line_height_unit":"","ocean_menu_typo_spacing":0,"ocean_menu_typo_spacing_tablet":0,"ocean_menu_typo_spacing_mobile":0,"ocean_menu_typo_spacing_unit":"","ocean_menu_link_color":"","ocean_menu_link_color_hover":"","ocean_menu_link_color_active":"","ocean_menu_link_background":"","ocean_menu_link_hover_background":"","ocean_menu_link_active_background":"","ocean_menu_social_links_bg":"","ocean_menu_social_hover_links_bg":"","ocean_menu_social_links_color":"","ocean_menu_social_hover_links_color":"","ocean_disable_title":"default","ocean_disable_heading":"default","ocean_post_title":"","ocean_post_subheading":"","ocean_post_title_style":"","ocean_post_title_background_color":"","ocean_post_title_background":0,"ocean_post_title_bg_image_position":"","ocean_post_title_bg_image_attachment":"","ocean_post_title_bg_image_repeat":"","ocean_post_title_bg_image_size":"","ocean_post_title_height":0,"ocean_post_title_bg_overlay":0.5,"ocean_post_title_bg_overlay_color":"","ocean_disable_breadcrumbs":"default","ocean_breadcrumbs_color":"","ocean_breadcrumbs_separator_color":"","ocean_breadcrumbs_links_color":"","ocean_breadcrumbs_links_hover_color":"","ocean_display_footer_widgets":"default","ocean_display_footer_bottom":"default","ocean_custom_footer_template":"0","ocean_post_oembed":"","ocean_post_self_hosted_media":"","ocean_post_video_embed":"","ocean_link_format":"","ocean_link_format_target":"self","ocean_quote_format":"","ocean_quote_format_link":"post","ocean_gallery_link_images":"off","ocean_gallery_id":[],"footnotes":""},"categories":[8],"tags":[20],"class_list":["post-2192","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","tag-stm32-gpio","entry","has-media"],"yoast_head":"\nSTM32 GPIO Lecture 6 : GPIO output mode with push pull state<\/title>\n<meta name=\"description\" content=\"GPIO output mode with push pull state.This is the default configuration of any GPIO pin when you configure the pin for output mode\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"STM32 GPIO Lecture 6 : GPIO output mode with push pull state\" \/>\n<meta property=\"og:description\" content=\"GPIO output mode with push pull state.This is the default configuration of any GPIO pin when you configure the pin for output mode\" \/>\n<meta property=\"og:url\" content=\"https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/\" \/>\n<meta property=\"og:site_name\" content=\"FastBit EBA\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/fastbiteba\/\" \/>\n<meta property=\"article:published_time\" content=\"2019-07-02T09:55:12+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2023-08-18T09:11:22+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/fastbitlab.com\/blog\/wp-content\/uploads\/2019\/07\/Screenshot-106.png\" \/>\n\t<meta property=\"og:image:width\" content=\"718\" \/>\n\t<meta property=\"og:image:height\" content=\"445\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"FastBitLab\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@fastbiteba\" \/>\n<meta name=\"twitter:site\" content=\"@fastbiteba\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"FastBitLab\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/gpio-output-mode-push-pull-state\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/gpio-output-mode-push-pull-state\\\/\"},\"author\":{\"name\":\"FastBitLab\",\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/#\\\/schema\\\/person\\\/e32b38e733a0d76ffa7e6bc998652e5d\"},\"headline\":\"STM32 GPIO Lecture 6 : GPIO output mode with push pull state\",\"datePublished\":\"2019-07-02T09:55:12+00:00\",\"dateModified\":\"2023-08-18T09:11:22+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/gpio-output-mode-push-pull-state\\\/\"},\"wordCount\":302,\"commentCount\":2,\"publisher\":{\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/gpio-output-mode-push-pull-state\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/wp-content\\\/uploads\\\/2019\\\/07\\\/Screenshot-106.png\",\"keywords\":[\"STM32 GPIO Lectures\"],\"articleSection\":[\"Blog\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/gpio-output-mode-push-pull-state\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/gpio-output-mode-push-pull-state\\\/\",\"url\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/gpio-output-mode-push-pull-state\\\/\",\"name\":\"STM32 GPIO Lecture 6 : GPIO output mode with push pull state\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/gpio-output-mode-push-pull-state\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/gpio-output-mode-push-pull-state\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/wp-content\\\/uploads\\\/2019\\\/07\\\/Screenshot-106.png\",\"datePublished\":\"2019-07-02T09:55:12+00:00\",\"dateModified\":\"2023-08-18T09:11:22+00:00\",\"description\":\"GPIO output mode with push pull state.This is the default configuration of any GPIO pin when you configure the pin for output mode\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/gpio-output-mode-push-pull-state\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/gpio-output-mode-push-pull-state\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/gpio-output-mode-push-pull-state\\\/#primaryimage\",\"url\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/wp-content\\\/uploads\\\/2019\\\/07\\\/Screenshot-106.png\",\"contentUrl\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/wp-content\\\/uploads\\\/2019\\\/07\\\/Screenshot-106.png\",\"width\":718,\"height\":445},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/gpio-output-mode-push-pull-state\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"STM32 GPIO Lecture 6 : GPIO output mode with push pull state\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/\",\"name\":\"FastBit EBA\",\"description\":\"Your Online Academy of Embedded Systems\",\"publisher\":{\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/#organization\",\"name\":\"FastBit EBA\",\"url\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/04\\\/logo-EzNrEnyr.png\",\"contentUrl\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/04\\\/logo-EzNrEnyr.png\",\"width\":640,\"height\":640,\"caption\":\"FastBit EBA\"},\"image\":{\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/fastbiteba\\\/\",\"https:\\\/\\\/x.com\\\/fastbiteba\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/fastbit-embedded-brain-academy-b3167b124\\\/\",\"https:\\\/\\\/www.youtube.com\\\/channel\\\/UCa1REBV9hyrzGp2mjJCagBg\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/fastbitlab.com\\\/blog\\\/#\\\/schema\\\/person\\\/e32b38e733a0d76ffa7e6bc998652e5d\",\"name\":\"FastBitLab\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/9230d0f9bdef28b63a01e7ca274ee7b2e8ed9abe932ee564af8809caaf52a0c8?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/9230d0f9bdef28b63a01e7ca274ee7b2e8ed9abe932ee564af8809caaf52a0c8?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/9230d0f9bdef28b63a01e7ca274ee7b2e8ed9abe932ee564af8809caaf52a0c8?s=96&d=mm&r=g\",\"caption\":\"FastBitLab\"},\"description\":\"The FastBit Embedded Brain Academy uses the power of internet to bring the online courses related to the field of embedded system programming, Real time operating system, Embedded Linux systems, etc at your finger tip with very low cost. Backed with strong experience of industry, we have produced lots of courses with the customer enrolment over 3000+ across 100+ countries.\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"STM32 GPIO Lecture 6 : GPIO output mode with push pull state","description":"GPIO output mode with push pull state.This is the default configuration of any GPIO pin when you configure the pin for output mode","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/","og_locale":"en_US","og_type":"article","og_title":"STM32 GPIO Lecture 6 : GPIO output mode with push pull state","og_description":"GPIO output mode with push pull state.This is the default configuration of any GPIO pin when you configure the pin for output mode","og_url":"https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/","og_site_name":"FastBit EBA","article_publisher":"https:\/\/www.facebook.com\/fastbiteba\/","article_published_time":"2019-07-02T09:55:12+00:00","article_modified_time":"2023-08-18T09:11:22+00:00","og_image":[{"width":718,"height":445,"url":"https:\/\/fastbitlab.com\/blog\/wp-content\/uploads\/2019\/07\/Screenshot-106.png","type":"image\/png"}],"author":"FastBitLab","twitter_card":"summary_large_image","twitter_creator":"@fastbiteba","twitter_site":"@fastbiteba","twitter_misc":{"Written by":"FastBitLab","Est. reading time":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/#article","isPartOf":{"@id":"https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/"},"author":{"name":"FastBitLab","@id":"https:\/\/fastbitlab.com\/blog\/#\/schema\/person\/e32b38e733a0d76ffa7e6bc998652e5d"},"headline":"STM32 GPIO Lecture 6 : GPIO output mode with push pull state","datePublished":"2019-07-02T09:55:12+00:00","dateModified":"2023-08-18T09:11:22+00:00","mainEntityOfPage":{"@id":"https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/"},"wordCount":302,"commentCount":2,"publisher":{"@id":"https:\/\/fastbitlab.com\/blog\/#organization"},"image":{"@id":"https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/#primaryimage"},"thumbnailUrl":"https:\/\/fastbitlab.com\/blog\/wp-content\/uploads\/2019\/07\/Screenshot-106.png","keywords":["STM32 GPIO Lectures"],"articleSection":["Blog"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/","url":"https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/","name":"STM32 GPIO Lecture 6 : GPIO output mode with push pull state","isPartOf":{"@id":"https:\/\/fastbitlab.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/#primaryimage"},"image":{"@id":"https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/#primaryimage"},"thumbnailUrl":"https:\/\/fastbitlab.com\/blog\/wp-content\/uploads\/2019\/07\/Screenshot-106.png","datePublished":"2019-07-02T09:55:12+00:00","dateModified":"2023-08-18T09:11:22+00:00","description":"GPIO output mode with push pull state.This is the default configuration of any GPIO pin when you configure the pin for output mode","breadcrumb":{"@id":"https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/#primaryimage","url":"https:\/\/fastbitlab.com\/blog\/wp-content\/uploads\/2019\/07\/Screenshot-106.png","contentUrl":"https:\/\/fastbitlab.com\/blog\/wp-content\/uploads\/2019\/07\/Screenshot-106.png","width":718,"height":445},{"@type":"BreadcrumbList","@id":"https:\/\/fastbitlab.com\/blog\/gpio-output-mode-push-pull-state\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/fastbitlab.com\/blog\/"},{"@type":"ListItem","position":2,"name":"STM32 GPIO Lecture 6 : GPIO output mode with push pull state"}]},{"@type":"WebSite","@id":"https:\/\/fastbitlab.com\/blog\/#website","url":"https:\/\/fastbitlab.com\/blog\/","name":"FastBit EBA","description":"Your Online Academy of Embedded Systems","publisher":{"@id":"https:\/\/fastbitlab.com\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/fastbitlab.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/fastbitlab.com\/blog\/#organization","name":"FastBit EBA","url":"https:\/\/fastbitlab.com\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/fastbitlab.com\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/fastbitlab.com\/blog\/wp-content\/uploads\/2026\/04\/logo-EzNrEnyr.png","contentUrl":"https:\/\/fastbitlab.com\/blog\/wp-content\/uploads\/2026\/04\/logo-EzNrEnyr.png","width":640,"height":640,"caption":"FastBit EBA"},"image":{"@id":"https:\/\/fastbitlab.com\/blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/fastbiteba\/","https:\/\/x.com\/fastbiteba","https:\/\/www.linkedin.com\/in\/fastbit-embedded-brain-academy-b3167b124\/","https:\/\/www.youtube.com\/channel\/UCa1REBV9hyrzGp2mjJCagBg"]},{"@type":"Person","@id":"https:\/\/fastbitlab.com\/blog\/#\/schema\/person\/e32b38e733a0d76ffa7e6bc998652e5d","name":"FastBitLab","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/9230d0f9bdef28b63a01e7ca274ee7b2e8ed9abe932ee564af8809caaf52a0c8?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/9230d0f9bdef28b63a01e7ca274ee7b2e8ed9abe932ee564af8809caaf52a0c8?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/9230d0f9bdef28b63a01e7ca274ee7b2e8ed9abe932ee564af8809caaf52a0c8?s=96&d=mm&r=g","caption":"FastBitLab"},"description":"The FastBit Embedded Brain Academy uses the power of internet to bring the online courses related to the field of embedded system programming, Real time operating system, Embedded Linux systems, etc at your finger tip with very low cost. Backed with strong experience of industry, we have produced lots of courses with the customer enrolment over 3000+ across 100+ countries."}]}},"_links":{"self":[{"href":"https:\/\/fastbitlab.com\/blog\/wp-json\/wp\/v2\/posts\/2192","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/fastbitlab.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/fastbitlab.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/fastbitlab.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/fastbitlab.com\/blog\/wp-json\/wp\/v2\/comments?post=2192"}],"version-history":[{"count":5,"href":"https:\/\/fastbitlab.com\/blog\/wp-json\/wp\/v2\/posts\/2192\/revisions"}],"predecessor-version":[{"id":15529,"href":"https:\/\/fastbitlab.com\/blog\/wp-json\/wp\/v2\/posts\/2192\/revisions\/15529"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/fastbitlab.com\/blog\/wp-json\/wp\/v2\/media\/2194"}],"wp:attachment":[{"href":"https:\/\/fastbitlab.com\/blog\/wp-json\/wp\/v2\/media?parent=2192"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/fastbitlab.com\/blog\/wp-json\/wp\/v2\/categories?post=2192"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/fastbitlab.com\/blog\/wp-json\/wp\/v2\/tags?post=2192"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}