{"id":5578,"date":"2021-03-08T09:17:32","date_gmt":"2021-03-08T09:17:32","guid":{"rendered":"http:\/\/fastbitlab.com\/?p=5578"},"modified":"2023-08-31T12:51:45","modified_gmt":"2023-08-31T07:21:45","slug":"about-mcu-development-board","status":"publish","type":"post","link":"https:\/\/fastbitlab.com\/blog\/about-mcu-development-board\/","title":{"rendered":"FreeRTOS Lecture 7 – About MCU Development board"},"content":{"rendered":"
\n
\n
\n
\n

 <\/p>\n<\/div>\n

\n

About MCU Development board<\/span><\/h1>\n
\n
\n
\n

 <\/p>\n

<\/div>\n

 <\/p>\n<\/div>\n<\/div>\n<\/div>\n

If you are a total beginner and don\u2019t have any boards with you and are looking for some best MCU development boards, then take a look into the NUCLEO-F446RE based Nucleo board. <\/span><\/p>\n

Both the NUCLEO-F446RE<\/a><\/span> and STM32F4 discovery board<\/a><\/span> are based on a microcontroller, which is based on the STM32F4x family of the microcontroller. You can also put Nucleo code on the discovery board. No problem. But you would need either one of these boards.<\/span><\/p>\n

If you are a beginner, then NUCLEO-F446RE is the best choice since it is of very low cost compared to the discovery board. Now that would be sufficient for the beginner. <\/span><\/p>\n

 <\/p>\n

Remember that, whenever you want to buy a board then you should always keep in mind a couple of factors, as follows:<\/span><\/p>\n