STM32 PLL Programming Fundamentals

STM32 PLL Programming Fundamentals

STM32 PLL Programming Fundamentals

 

 

In this article let’s explore about STM32 PLL programming fundamentals. This video explains Clocking MCU by Internal PLL(Running MCU at Full Speed).

STM32F4xx based MCU is used in this video and it clearly explains all the PLL aspects of the Microcontroller.

PLL is a clock generation engine in the MCU which is used to generate the clock speed which is much higher than the internal HSI or external clock . In MCU, most of the peripheral like USB,Ethernet PHY cannot work if you clock the MCU by low speed  HSI or HSE. So, in those cases you can take the help of PLL.

Remember that in MCU PLL is not enabled by default, it must be configured before you use it. This video explains how you can configure the PLL to generate high frequency clocks.

 

 

 

 

FastBitLab

The FastBit Embedded Brain Academy uses the power of internet to bring the online courses related to the field of embedded system programming, Real time operating system, Embedded Linux systems, etc at your finger tip with very low cost. Backed with strong experience of industry, we have produced lots of courses with the customer enrolment over 3000+ across 100+ countries.